Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning it could be due to an unresponsive battery in the coin-cell or damaged receiver modules, water issues, or a malfunctioning chip. These are all easy solutions that will bring your car back to speed in a matter of minutes!
Car keys can also get damaged because the blade of the key gets worn. You can easily fix this issue by visiting your local Car Key Man Auto Locksmith to install a new blade.
Battery
The battery of the key fob in your Peugeot 308 can sometimes die or become weak enough to send a strong signal to the car. The key fob could be inoperable and prevent you from locking or unlocking your doors or even starting the engine. You'll require a new battery for your key fob to correct this.
peugeot 308 key fob replacement 'll need to buy a replacement battery from an auto parts store or a local hardware store. When you purchase the battery, ensure that it's fresh and hasn't just been sitting on the shelf for too long. A fresh new battery will have greater capacity and will also be able to send a stronger signal to the car.
After replacing the battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors won't unlock it's likely that the receiver module in the car is at fault. The local Peugeot dealer can reprogram the receiver module.
It's also possible that the key fob's internal chip has been damaged. This could happen if you drop your key fob on the ground or expose it to water. The rubber seals that protect the chip from moisture could get worn out over time, particularly if the key fob is exposed to water for prolonged period of time, like when you submerge it in the ocean at the beach. To prevent this from happening, it's important to keep your key fob safe from moisture and not let it come in contact with water.
Water Damage
If your key fob is wet in water, whether you dropped it into the pool or threw it into the puddle, don't believe it's a case of lost cause. The key fob is protected by rubber seals, but prolonged exposure to water can harm its electronic chip. Water is a good conductor, and any water that gets inside the key fob can cause an array of short circuits which eventually damage the electronic chip. After taking the battery out, scrub its contacts with isopropyl ethanol and dry it completely before putting it back into.
Your Peugeot 308 may not start because of an unresponsive battery. Jumper cables are a great method to start the engine when you have an additional vehicle. If the battery is the problem, it will need to be replaced.
A bad receiver in the car could also block it from receiving the signal from the key fob. It could be a issue with the antenna or wiring or the key fob might be damaged. If you are using the latest key fob, it might need to be programmed to the vehicle. If you are unable to solve the issue, call an expert technician. A skilled technician will be able to identify the issue quickly and correct it swiftly.
Radio Interference
The signs of a key fobs that are not recognized or having a restricted range of operation usually mean there is a problem with the system. It is either radiated or conducted, with the former being caused by power supply cables or speaker wiring passing too close to electrical components. In general, rerouting cables or moving them away from these components will fix the issue.
It's unlikely that someone is monitoring your key fob signals to take your car away, but it is possible that the signal has been drowned out by radio frequency interference. This is a simple issue to solve.
If you are having key fob not being recognized, try a fresh battery. Make sure the battery is the right size and type. A wrongly sized battery can cause damage to the fob.
These devices may interfere with the key signal, if they utilize the same radio frequency. Do not connect these devices to your key fob.
Pairing Issues
A car's remote keyless entry system has an antenna that receives radio frequency signals from the key fob. It will not be possible to start your vehicle if the receiver is malfunctioning even if your key fob is working and can be reprogrammed. The issue can be caused in a number different ways, such as the battery of the coin-cell being dead or water damage. The receiver may also be malfunctioning due to a software error or internal damage to the key itself.
One of the most common reasons that your Peugeot 308 key fob doesn't work is that the battery inside has gone out of service. It is possible to replace it with a new battery, but it is important to select the correct battery for your key fob. It is best to use batteries that are the same size in terms of voltage, size, and specifications as the original.
Another reason that your Peugeot 308 key fob might not work is because it is paired with another vehicle. It is possible that you have accidentally given the key fob to someone else, or the key was used to unlock other vehicles. You can resolve this by reprogramming your key fob with an OBDII scanner. This tool will request details about your car, such as its VIN or engine type. It is essential to enter the correct details.